Features - Mitsubishi Electric MELSEC-Q Series User Manual

1 OVERVIEW

1.1 Features

Comparison of installation space
98mm
(3.86
inch)
5 Slot Main Base Unit 245mm(9.65inch)
1 - 3
(1) Many controllable input/output points
As the number of input/output points accessible to the input/output modules
loaded on the base units, 256 points (X/Y0 to FF) are supported by the
Q00JCPU and 1024 points (X/Y0 to 3FF) by the Q00CPU/Q01CPU.
Up to 2048 points (X/Y0 to 7FF) are supported as the number of input/output
device points usable for refreshing the remote input/output of CC-Link and the
link inputs and outputs (LX, LY) of MELSECNET/H.
(2) Lineup according to program capacity
The optimum CPU module for the program capacity to be used can be selected.
Q00JCPU, Q00CPU
Q01CPU
(3) Fast processing
The LD instruction processing speeds are the following values.
Q00JCPU
Q00CPU
Q01CPU
In addition, the high-speed system bus of the MELSEC-Q series base unit
speeds up access to an intelligent function module and the link refresh of a
network.
MELSECNET/H link refresh processing : 2.2ms/2k words
*1 This speed only applies when the SB/SW is not used with the Q01CPU and
the MELSECNET/H network module is used as the main base unit.
(4) Increase in debugging efficiency through high-speed
communication with GX Developer
The RS-232 interface of the Basic model QCPU enables program write/read or
monitor at a maximum of 115.2kbps.
(5) Saved space by a reduction in size
The installation area of the Basic model QCPU is about 60% of that of the AnS
series.
1SX10
8 Slot Main Base Unit 328mm(12.92inch)
12 Slot Main Base Unit 439mm(17.30inch)
: 8k steps
: 14k steps
: 0.20µs
: 0.16µs
: 0.10µs
1SY50 1SX41 1SY41
1
1SX81 1SY81 1SX42
(depth:98mm(3.86inch))
MELSEC-Q
1SY42
1 - 3