Advertisement
Getting started
A. Install the vacuum pump and liquid trap system
Place the Extraction+ vacuum
1
pump
On or under the workbench,
or on the floor.
If needed, cut the silicone hoses to the appropriate lengths
3
Connect the Extraction+ vacuum pump
4
and the waste container using the
This hose must be connected to the
shorter port of the thread.
2
We recommend using the longest portion of
the hose for connecting the Extraction+ vacuum
pump to the waste container.
Ensure that the connection is loose
enough to prevent the waste container
from falling.
silicone hose
Place the waste container
(GL45-threaded bottle)
On or under the workbench,
or on the floor.
Bottle smaller than one
liter can also be placed
on the Extraction+
vacuum pump.
Advertisement
