Getting Started - Waters Shaker+ Care And Use Manual

[ CARE AND USE MANUAL ]

Getting started

Before
If you do not have a OneLab account, please create one by going to:
you begin
https://onelab.andrewalliance.com/signup
Plug your Shaker+
1
into a power source.
The device will automatically start up.
Only use the provided AC/DC
power supply unit and cords.
Connect your computer, tablet or smartphone to the Shaker+
3
A. Go to your Wi-Fi settings
and select the network named
xxxx.xxxxx is the Shaker+ device serial number (you can nd it on top of your
device)
If you do not have access to a Wi-Fi
!
compatible device, please refer to
our online help:
help.andrewalliance.com
B. The LED indicator will stop blinking when the device has been successfully connected.
Launch a web browser, type
4
and follow the on-screen steps to continue the installation.
Please note that the ins-
!
tallation page might open
automatically.
Wait for the LED indicator to
2
turn blue and blink.
After a couple of mi-
nutes, the Shaker+ will
inform you when it is
in installation mode.
Shaker-5xx.4xxx.xxxxx
http://192.168.2.1
http://192.168.2.1
If the Shaker+ doesn't automatically enter ins-
!
tallation mode, press the power button 5 times.
Shaker-5xx.4xxx.xxxxx
scan me