Table of Contents
Advertisement
Replacing light bulbs in the side additional
indicators
Requirements:
The lighting system is switched off.
R
You will need a WY 5 W bulb.
R
Push additional indicator
#
swivel it out.
Push the bulb rearwards.
#
Gently turn the bulb counter-clockwise and
#
take it out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise to screw it in.
Align additional indicator
#
engage it.
Replacing rear bulbs
Overview of rear compartment lamp types
1
Third brake light: LED
2
Additional turn signal lamp on the roof:
P 21 W
3
Rear fog lamp (driver's side): P 21 W
4
Backup lamp: P 21 W
5
Brake light, tail light/standing lamps/turn
signal light: P 21 W side marker light: LED
Replacing light sources in the tail lamp
Requirements:
R
R
R
R
Removing the tail lamp
* NOTE Damage to the paintwork during
The paintwork may be damaged when the tail
lamps are removed. The tail lamp may, for
example, scratch the paintwork when it is
removed.
#
#
1
forwards and
1
at the front and
Please note that you can change the bulb of the
backing up light only in the case of an LED tail
lamp.
#
%
#
#
#
Light and vision
The lighting system is switched off.
Standard tail lamp: you require a P 21 W
light source.
LED tail lamp: you require a W 16 W light
source.
Additional turn signal lamp on the roof:
you require a P 21 W light source.
tail lamp removal
Remove the tail lamps carefully.
Mercedes-Benz recommends having the
tail lamp light sources replaced at a
qualified specialist workshop.
Open the tailgate/rear-end door.
You will find a screwdriver in the vehicle tool
kit (
page 201).
/
Unscrew two side screws 1.
Push tail lamp
2
outwards against bolts
as far as it will go.
Press tail lamp
2
off outwards and away
from bolts 3.
83
3
Advertisement
Table of Contents
