Table of Contents
Advertisement
82
Light and vision
To remove: grip the center of cover 1, slide
#
it upwards and pull it out.
The cover will hang downwards on the strap.
To install: insert cover
1
#
slide it downwards until it engages.
Low beam
Remove the cover in the front wheel arch.
#
Turn housing cover
1
counter-clockwise and
#
remove it.
Turn socket
2
for low beam to the left and
#
pull it out.
Pull the bulb out of socket 2.
#
Insert the new bulb into socket 2.
#
Insert socket
2
and rotate it to the right to
#
tighten it.
Press on housing cover
#
the right to tighten it.
Replace the cover in the front wheel arch.
#
High beam, standing/parking lamps and day‐
time running lamps
at the top and
#
#
#
#
#
#
Turn signal light
1
and rotate it to
#
#
#
#
#
#
Open the hood.
Turn housing cover
1
counter-clockwise and
remove it.
Pull out the bulb with socket 2.
Insert the new bulb with socket
engage it as far as it will go.
Press on housing cover
1
the right to tighten it.
Close the hood.
Open the hood.
Turn socket
1
counter-clockwise and pull it
out.
Pull the bulb out of socket 1.
Insert the new bulb into socket 1.
Insert socket
1
and turn it clockwise until it
engages.
Close the hood.
2
and
and rotate it to
Advertisement
Table of Contents
