Mercedes-Benz Metris 2021 Operating Instructions Manual page 147

Table of Contents

Advertisement

For more information, see "Blind Spot
Assist" (
page 129).
/
If the symbol for Lane Keeping Assist
R
shows the lane marking as a broken line,
Lane Keeping Assist has been switched
on but is not ready for use.
For more information, see "Lane Keeping
Assist" (
page 129).
/
%
In addition, you can display the evaluation of
ATTENTION ASSIST or the attention level in
the status overview (
/
Calling up displays on the Trip menu
Displaying the range and current fuel con‐
sumption
Use the = or ; button to select the
#
Trip
menu.
Use the : or 9 button to select range
#
1
and consumption 2.
Approximate range
1
is determined by the cur‐
rent driving style and fuel supply. If there is only a
small amount of fuel left in the fuel tank, the dis‐
play will show a vehicle being refueled Ï
instead of the approximate range.
Recuperation display
3
shows whether and, if
so, how much kinetic energy is being converted
to electric energy while the vehicle is coasting.
The recuperated energy is then stored in the
starter battery. Recuperation display
dependent on the engine installed and is there‐
fore not available in all vehicles.
Displaying trip computer "From start" or
"From reset"
Use the = or ; button to select the
#
Trip
menu.
Instrument cluster and on-board computer 145
#
5
The values in the
those measured since the start of the journey.
page 127).
The values in the
those measured since the submenu was last
reset.
The
be reset under the following conditions:
R
R
R
The
be reset under the following conditions:
R
R
Displaying the digital speedometer
#
#
Resetting values
3
is
The values of the following functions can be
reset:
R
R
R
#
#
#
Use the : or 9 button to select the
From Start
or
From Reset
submenu.
The following values will be displayed:
Distance
R
Length of journey
R
Average fuel consumption
R
Average speed
R
From Start
submenu relate to
From Reset
submenu relate to
From Start
trip computer will automatically
The ignition has been switched off for longer
than four hours.
A time of 999 hours has been exceeded.
A distance of 9999 mi (9999 km) has been
exceeded.
From Reset
trip computer will automatically
A time of 9999 hours has been exceeded.
A distance of 99,999 mi (99,999 km) has
been exceeded.
Use the = or ; button to select the
Trip
menu.
Select the digital speedometer using
the : or 9 button.
The following will be shown on the display:
Gearshift recommendation:
R
Vehicles with automatic transmission
Digital speedometer
R
Trip distance
"From start" trip computer
"From reset" trip computer
Use the = or ; button to select the
Trip
menu.
Use the : or 9 button to select the
function to be reset.
Press the a button.

Advertisement

Table of Contents
loading

Table of Contents