Mercedes-Benz Metris 2021 Operating Instructions Manual page 60

Table of Contents

Advertisement

58
Opening and closing
The "convenience opening" function can only be
operated using the key. The key must be in close
proximity to the driver's or co-driver door.
Press and hold the % button on the key.
#
The following functions are performed:
The vehicle is unlocked
R
The side windows are opened
R
To interrupt convenience opening: release
#
the % button.
Closing the side windows from the outside
(convenience closing)
& WARNING Risk of entrapment due to not
paying attention during convenience clos‐
ing
When the convenience closing feature is
operating, parts of the body could become
trapped in the closing area of the side win‐
dows.
When the convenience closing feature is
#
operating, monitor the entire closing
process and make sure that no body
parts are in the closing area.
Press and hold the & button on the key.
#
The following functions are performed:
the vehicle is locked
R
the side windows are closed
R
To interrupt convenience closing: release
#
the & button.
Adjusting the side windows
The side windows must be readjusted after a mal‐
function or a voltage supply interruption.
Switch on the power supply (
#
Push both buttons on the power window and
#
hold for approximately one second after the
side window has closed.
If the side windows remain closed when you
#
release the buttons, they have been reset cor‐
rectly. If this is not the case, repeat the steps
described for the open side windows.
Opening and closing the sliding windows
To open: press both handle sections
#
together simultaneously and slide the sliding
window to the desired notch.
To close: slide the sliding window shut until
#
the handle sections
flat.
page 97).
/
1
1
engage audibly and lie

Advertisement

Table of Contents
loading

Table of Contents