Mercedes-Benz Metris 2021 Operating Instructions Manual page 204

Table of Contents

Advertisement

202 Breakdown assistance
Storage compartment in the rear compart‐
ment
Opening the storage compartment
Storage compartment in the rear compartment
on the right-hand side of the vehicle
If necessary, fold up the rear seat.
#
Turn top rotary catch
1
#
tom rotary catch
1
counter-clockwise.
Remove cover 2.
#
Removing the vehicle tool kit and jack from
the tool holder
Depending on the equipment version of the vehi‐
cle, the vehicle tool kit and the jack are stored
either in a storage tray or in a tool holder with a
cover.
Storage compartment with tool holder
Remove clamping strap 4.
#
Lift off tool holder cover 3.
#
Carefully pull the vehicle tool kit and jack
#
upwards out of the storage compartment. Lift
the jack slightly before removing it and turn it
to a diagonal position in the storage compart‐
ment.
Removing the vehicle tool kit and jack from
the storage tray
Storage compartment with storage tray
#
#
Stowing the vehicle tool kit and the jack
Storage compartment with tool holder
#
clockwise and bot‐
#
#
#
Storage compartment with storage tray
#
#
#
#
Closing the storage compartment
#
#
#
Open clamping strap
5
and remove jack
by pulling it upwards at an angle from the
storage tray compartment.
Remove vehicle tool bag
7
the storage tray compartment.
Before storing, wind the jack to the fully
closed position and place it so that the hand‐
wheel is facing forwards and the plate is
facing inwards.
Place the jack and vehicle tool kit into the
tool holder.
Replace cover
3
of the tool holder.
Tighten clamping strap 4.
Insert vehicle tool bag
7
into the front com‐
partment of the storage tray.
Before storing, wind jack
6
closed position and place it so that the hand
wheel is facing downwards and the plate is
facing inwards at an angle.
Insert jack
6
into the back compartment of
the storage tray.
Press jack
6
into the upper holder and fas‐
ten clamping strap 5.
The jack is secured.
Put on cover 2.
Turn top rotary catch
1
counter-clockwise
and bottom rotary catch
1
Fold down the rear seat.
6
upwards from
to the fully
clockwise.

Advertisement

Table of Contents
loading

Table of Contents