Table of Contents
Advertisement
230 Technical data
Have the brake fluid renewed at the
#
specified intervals.
* NOTE Damage to paint, plastic or rubber
by brake fluid
There is a risk of damage to property if brake
fluid comes into contact with paint, plastic or
rubber.
If paint, plastic or rubber comes into
#
contact with brake fluid, rinse with
water immediately.
Observe the notes on paintwork/matte finish
paintwork care (
page 184).
/
Have the brake fluid renewed every two years at
a qualified specialist workshop.
Only use brake fluid approved by Mercedes-Benz
in accordance with MB-Freigabe or MB-Approval
331.0.
Information on brake fluid is available at the fol‐
lowing locations:
In the MB Specifications for operating fluids
R
331.0
At https://bevo.mercedes-benz.com
-
In the BeVo app
-
At a qualified specialist workshop
R
Coolant
Notes on coolant
Observe the notes on operating fluids
(
page 227).
/
& WARNING ‑ Risk of fire and injury from
antifreeze
If antifreeze comes into contact with hot com‐
ponent parts in the engine compartment, it
may ignite.
Allow the engine to cool down before
#
adding antifreeze.
Make sure that no antifreeze spills out
#
next to the filler opening.
Thoroughly clean off any antifreeze from
#
component parts before starting the
vehicle.
* NOTE Damage caused by incorrect cool‐
ant
Only add coolant that has been pre‐
#
mixed with the required antifreeze pro‐
tection.
Information on coolant is available at the follow‐
ing locations:
In the MB Specifications for operating fluids
R
320.1
At https://bevo.mercedes-benz.com
-
In the BeVo app
-
At a qualified specialist workshop
R
* NOTE Overheating at high outside tem‐
peratures
If an inappropriate coolant is used, the engine
cooling system is not sufficiently protected
against overheating and corrosion at high out‐
side temperatures.
Always use coolant approved by
#
Mercedes-Benz .
Observe the instructions in the MB
#
Specifications for operating fluids320.1.
* NOTE Paintwork damage due to coolant
Do not spill coolant on painted surfa‐
#
ces.
Have the coolant regularly replaced at a qualified
specialist workshop.
Note the proportion of anti-corrosion agent/anti‐
freeze in the engine cooling system within the fol‐
lowing temperature ranges:
At least 50% (antifreeze protection up to
R
about -35°F (-37°C))
Maximum 55% (antifreeze protection up to
R
-49°F (-45°C))
Coolant capacities
Coolant capacity
Model
All models
Capacity
Approx. 11 US qt
(10.4 l )
Advertisement
Table of Contents
