Mercedes-Benz Metris 2021 Operating Instructions Manual page 68

Table of Contents

Advertisement

66
Seats and stowage
one has any body parts in the sweep of
the seat.
If somebody becomes trapped, immedi‐
#
ately release the memory function posi‐
tion button.
The adjustment process is stopped.
& WARNING Risk of entrapment if the
memory function is activated by children
Children could become trapped if they acti‐
vate the memory function, particularly when
unattended.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take
#
the SmartKey with you and lock the
vehicle.
The memory function can be used when the igni‐
tion is switched off.
* NOTE Damage to the seat when moving
into a stored position
If the seat is moved out of the fully reclined
position into a stored seat position, it can col‐
lide with other vehicle parts.
This can damage the seat.
Before moving the seat into a stored
#
position, move the seat backrest into an
upright position.
Storing seat settings
Seat settings for up to three people can be stored
and called up using the memory function. The
position of the seat, seat backrest and head
restraint are stored as a single memory preset.
Adjust the seat to the desired position.
#
Briefly press memory button V and then
#
press preset position button 4, T or
U within three seconds.
An acoustic signal sounds. The settings are
stored.
To call up: press and hold preset position
#
button 4, T or U until the seat is in
the stored position.
Adjusting armrests
Fold the armrest upwards more than 45° in
#
position 2.
The armrest will be unlocked.
Fold the armrest forwards 3 as far as it will
#
go.
Slowly fold the armrest upwards into the
#
required position.
To fold the armrest upwards: if necessary,
#
fold the armrest upwards more than 90° in
position 1.
Rear bench seats
Notes on the rear seats
Bench seat anchorage
Keep the seat anchorages in the vehicle floor free
of dirt and objects at all times to ensure that the
seat engages securely.
& WARNING Risk of accident and injury as
a result of rear bench seat not being
engaged
If the rear bench seat is not engaged, it may
be flung around during travel.
Always make sure that the rear bench
#
seat is engaged as described.

Advertisement

Table of Contents
loading

Table of Contents