Table of Contents
Advertisement
Installing the EASY-ENTRY section
Place and engage the front seat anchorage of
#
the EASY-ENTRY section on the seat ancho‐
rages.
Fold the EASY-ENTRY section back.
#
The rear seat leg of the EASY-ENTRY section
will engage audibly. The indicator tab on the
seat anchorage will no longer be visible.
%
The EASY-ENTRY section is correctly engaged
when the seat anchorage engages audibly
and the indicator tab is no longer visible and
is fully retracted into the seat anchorage.
Vehicles with comfort rear bench seat:
#
Fold the seat backrest back to the seat posi‐
tion.
Moving the rear bench seat (standard and
comfort rear bench seat)
& WARNING Risk of becoming trapped
when adjusting the rear bench seat
When adjusting a rear bench seat, you or
another vehicle occupant could become trap‐
ped by the guide rail of the rear bench seat,
forexample.
Make sure that no one has any part of
#
their body within the sweep of the rear
bench seat when adjusting the rear
bench seat.
& WARNING Risk of injury due to moving
the rear bench seat while the vehicle is in
motion
If you move the rear bench seat while driving,
the seat may move in an unexpected or jerk‐
ing manner, forinstance when braking.
You could become trapped as well as thrown
against parts of the vehicle interior or other
vehicle occupants.
Only move the rear bench seat when
#
the vehicle is stationary.
Make sure that the rear bench seat is
#
engaged after it is moved.
& WARNING Risk of injury due to no pro‐
tective effect from the window airbag
If you move the seat position outside the
marked area, the window airbag can no lon‐
ger provide optimum protection.
Seats and stowage
The protective effect of the window airbag is
gradually reduced and may in some positions
no longer be provided at all.
Engage the rear seats or the rear bench
#
seat on the guide rail within the marked
area.
& WARNING Risk of injury from the front
seat being positioned too close to vehicle
occupants
If you move the rear seats or the rear bench
seat outside the markings on the guide rail,
this could result in the vehicle occupant strik‐
ing their head on the seat.
Maintain a minimum clearance of 2 in
#
(5 cm) between the knees of the
respective vehicle occupants and the
seat in front of them.
Requirements:
The vehicle is equipped with a seat rail sys‐
R
tem in the vehicle floor.
Maintain a minimum clearance of 2 in (5 cm)
between the knees of the vehicle occupants and
the seats in front of them.
Starting from the basic setting 2, the rear
bench seat for passengers can be moved for‐
wards or backwards by 2 in (5 cm). In doing so,
make sure that passengers have sufficient leg‐
room to reduce the risk of injury during braking.
69
1
Advertisement
Table of Contents
