Mercedes-Benz Metris 2021 Operating Instructions Manual page 52

Table of Contents

Advertisement

50
Opening and closing
To close: press and hold the 5 button on
#
the key for longer than 0.5 seconds.
You will hear two acoustic signals and the
sliding door will close automatically.
To interrupt automatic operation: briefly
#
press the 5 button on the key.
The sliding door stops moving.
%
In unfavorable operating conditions, e.g.
frost, ice or heavy soiling, press and hold the
appropriate sliding door button. The electric
sliding door moves with increased force.
Observe that, in such circumstances, the
obstacle detection is less sensitive. To stop
the movement, release the sliding door but‐
ton.
Opening/closing the electrical sliding door
from the outside
To open: pull door handle 1.
#
The sliding door unlocks, automatic operation
is started and the sliding door opens. In addi‐
tion, you will hear two warning signals.
To close: pull door handle 1.
#
The sliding door is released from its lock and
automatic operation is started. The sliding
door closes.
To interrupt automatic operation: pull door
#
handle
1
again.
Programming the key button for the sliding
door
Requirements
The vehicle is equipped with two electric slid‐
R
ing doors.
The sliding door to be programmed is open.
R
The ignition is switched on.
R
The 5 button on the key can be programmed.
Program the 5 button to open the right or left
sliding door.
1
Sliding door button for the sliding door on the
left-hand side
2
Sliding door button for the sliding door on the
right-hand side
Press and hold sliding door button
#
in the center console for the appropriate slid‐
ing door until the sliding door is closed and
four tones have sounded.
The
Left-hand Electric Sliding Door Key Pro-
grammed/Right-hand Electric Sliding Door
Key
Programedmessage appears in the dis‐
play.
Resetting the electric sliding door
You must reset the electric sliding door if there
has been a malfunction or a drop in voltage.
If the sliding door is open: close it by hand.
#
Using the corresponding 5 or 4 sliding
#
door button on the center console, open the
sliding door at least 15.8 in (40 cm) and then
close the sliding door completely.
When the sliding door is closed, open the slid‐
#
ing door fully using the corresponding 5
or 4 sliding door button on the center
console.
The sliding door is reset and operational.
1
or
2

Advertisement

Table of Contents
loading

Table of Contents