3-16.Video In Level Adjustment; 3-17.Mon Enc Level Adjustment - Panasonic AJ-D610WBP Service Manual

3-16. VIDEO IN Level Adjustment
BOARD ENCODER
TP VIDEO OUT
ADJUST VR105[RET_LEV]
INPUT Color Bar (GEN LOCK IN)
MODE CAMERA BAR
M. EQ. WFM
SPEC. A = 1V +/- 20mV
Supply a composite signal to GEN LOCK IN.
1.
Menu Setting
Set [MENU] switch to SET while pressing [SHIFT],
2.
[+], and [-] buttons on the operation panel.
3. Set the menu as shown below.
PAGE: MAIN MENU 3/4 ->
REC (ASPECT)/PB/RET
ITEM: REC SIGNAL: VIDEO
4. Connect a Waveform monitor to the VIDEO OUT,
and adjust VR105 so that the Level A is in the
specification.
5. Return the MENU as follows.
PAGE: MAIN MENU 3/4 ->
REC (ASPECT)/PB/RET
ITEM: REC SIGNAL: CAM
<NTSC>
<PAL>
3-17. MON ENC Level Adjustment
BOARD
TP
ADJUST
MODE
M. EQ.
SPEC.
Menu Setting
1. Set [MENU] switch to SET while pressing [SHIFT],
[+], and [-] buttons on the operation panel.
2. Set the menu as shown below.
PAGE:
ITEM:
EVR Setting
Set EVR as shown below.
COM:[1E] DATA:[03] ADR:[00]
COM:[1E] DATA:[04] ADR:[00]
3. Connect a Waveform monitor to the VIDEO OUT,
and adjust VR103 so that the Level A is in the
Specification.
4. Return the MENU as follows.
PAGE:
ITEM:
<NTSC>
A
<PAL>
ELE- 19
ENCODER
VIDEO OUT
VR103[ENC_LEV],EVR
CAMERA BAR
WFM
A = 1V +/- 20mV
SERVICE ADJ. 1/2
ECU CONNECT : EVR
MAIN MENU 3/4 -> VIDEO OUT
VIDEO OUT SEL: ENC
CHARACTER: ON
[Enter]
[Enter]
A