Error Rate Display And Confirmation Method; Error Rate Display Method - Panasonic AJ-D610WBP Service Manual

13. Error Rate Display and Confirmation Method

13-1. Error Rate Display Method

1. Press the "SHIFT/ITEM" "+" "-" and "PAGE" buttons of the MENU/Time Code Operation Button (in the door
of the right side panel) simultaneously and set the MENU switch to "SET", and then MENU screen is
displayed.
2. Press the "PAGE" button a few times until DESIGN MENU screen is displayed.
3. Confirm "BER SPEED" setting is "SLOW".
4. Select "BER ADJ" by "SHIFT/ITEM" button, and select the head
BER ADJ item
5. The Error rate will be displayed in the Audio meter on the Audio LCD panel.
: OFF / Lch / Rch
AUDIO LCD METER
- 0 -
- 10 -
- 20 -
- 30 -
- 40 -
- ∞ ∞ ∞ ∞ -
dB
CH1
L1
R1
L2
R2
Error rate Spec. "A"
CH2
L3
R4
L3
R4
INF-28