Panasonic AJ-D610WBP Service Manual page 44

<Trouble shooting>
Symptoms
Cause
Resolution
<Remarks>
1. Composition files of VFK1468A
File name
Batch file for the data backup
Backup.bat
(Camera recorder → PC)
Backup.txt Address data of backup area
Batch file for the restore data
Trans.bat
(PC → Camera recorder)
Batch file for communication
Fc_load.bat
(PC → Camera recorder)
Batch file for communication
Fc_load.txt
(supplement data)
2. DIP switch Settings for Flash memory version-up tool (VFK1304A).
Before use the VFK1304A confirm the setting of DIP SW as shown in Figure.3-3.
1
2
3
4
Error message "RS232C: Line Open Error" appeared then data transfer
interrupted.
Could not communicate the PC – Camera recorder.
⋅ Does an RS-232C cable use a designated thing? (9pin-9pin Cross)
⋅ Does set SW201 [LOAD] (CAM_SYS P.C.Board) to ON?
⋅ Is the Camera recorder's power turned on?
⋅ Is connect of each machine done properly? (as shown Figure.3-1)
Part
1 : ON
→ON
2 : ON
3 : OFF
4 : OFF
SW1
File name
Batch file for communication
Fl_pc.bat
(Camera recorder → PC)
Flmemv.exe RS232C communication program
Flmemv.map RS232C communication data
Backup.bin Backup(saved) data
For verify (automatically formation
Temp.bin
after backup)
Fig. 3-3
INF-32
Part