Panasonic AJ-D610WBP Service Manual page 28

[ DEFECT COMPENSATION MENU SCREEN ]
This menu is use for blemish compensation.
ITEM
DEFECT ADJ MODE
DEFECT NO.
CURSORS ADJ
H (+/- SW)
V (FF/REW SW)
FIELD CONT
DUAL PIXEL
CONPENSATION
DATA CLR
< DEFECT COMPENSATION >
DEFECT ADJ MODE
DEFECT NO.
CURSORS ADJ
V (+/- SW)
H (FF/REW SW)
FIELD CONT
DUAL PIXEL
COMPENSATION
DATA CLR
RANGE
ON/OFF OFF
00 - 15 00
------ ------
0000 - ------
0000 - ------
A/B A
ON/OFF OFF
ON/OFF ON
------ ------
INF-16
: OFF
: 00
0000
0000
: A
: OFF
: ON
PRESET
ON for Defect Compensation adjustment.
<Note>
This mode goes to OFF automatically
when MENU is closed or Page is
changed
Select of compensation No.
<Note>
This mode goes to OFF automatically
when MENU is closed or Page is
changed
Cursor can be moved by the following
way.
Horizontal direction :+/- SW
Vertical direction : FF/REW SW
Horizontal position address of cursor.
Vertical position address of cursor.
Field mode of Defect Compensation.
(Not working)
Select the Dual pixel compensation
ON/OFF.
Select the Compensation ON/OFF.
All defect compensation data is reset to
original data, when this item is selected
and + button is pressed with DEFECT
ADJ MODE OFF
REMARKS