Option Menu Screen - Panasonic AJ-D610WBP Service Manual

9-3. Option Menu Screen

[Option Menu 1 Screen]
ITEM
ENG SECURITY
TC OUT
BATT WARNING
TAPE WARNING
MIC POWER INH
(PAL MODEL ONLY)
BATT REMAIN (F)
TAPE REMAIN
CUE SELECT
V BLANKING
SAVE LED
ENG SECURITY
TC OUT
BATT WARNING
TAPE WARNING
MIC POWER INH
BATT REMAIN(F)
TAPE REMAIN
CUE SELECT
V BLANKING
SAVE LED
RANGE PRESET
ON/OFF OFF
TCG,TCG/TCR TCG
ON/OFF ON
3min/2min 3min
ON/OFF OFF
70%/100% 70%
3min/5min 5min
SW/CH1/CH2/
SW
MIX
20H/21H 20H
SAVE/S.&TAPE S.&TAPE
< OPTION MENU 1>
: OFF
: TCG
: ON
: 3min
: OFF
: 70%
: 3min
: SW
: 20H
: SAVE
OFF : Engineer, Service and Design menu can be opened.
ON : Engineer, Service and Design menu can not be opened.
To open those menus turn Power SW OFF under the
condition the CAM/BAR SW set to BAR side and then
AWB/ABB SW set to ABB side, turn POWER SW ON all
menus can be open.
TCG : TCG signal always output
TCG/TCR : TCR signal output in V-V mode and TCG signal
output in E-E mode.
ON : When the unit becomes BATT NEAR END condition,
ALARM and TALLY lamp are flashing.
OFF : When the unit becomes BATT NEAR END condition,
ALARM and TALLY are not flashing.
ON : When the unit becomes BATT NEAR END condition,
ALARM and TALLY lamp are flashing.
OFF : When the unit becomes BATT NEAR END condition,
ALARM and TALLY lamp are not flashing.
MIC POWER SW SETTING
ON : MIC POWER SW is always OFF.
OFF : MIC POWER SW can be setting by Side panel.
The way to battery remains display. (LCD PANEL)
70% : MAX70% display.
100% : MAX100% display.
The way to tape remains display. (LCD PANEL)
3min : Display to 3min / scale
5min : Display to 5min / scale
Select the CUE audio sources.
SW : Normal mode (Can be select the side panel sw)
Other : Mode is Fixed to your selected item.
Setting for V Blanking position.
Role addition to the "VTR SAVE" indicator. (On the VF)
SAVE : Normal mode ( SAVE / STBY SW position
displayed )
S.&TAPE : Tape remain warning (By LED Flashing) in additions to
Normal mode.
INF-23
REMARK