1-5. Removal of Cylinder Unit
1. Remove the Right Side Panel.
2. Remove the Mechanical Chassis Unit
3. Lift up the flexible cable for remove the 3 screws as
shown as below figure. Disconnect the connector
(A) and the 3 screws (A).
Screws (A)
4. Remove the 2 screws and remove the T1 Guide.
Remove the screw (B) and the Cylinder unit with
care not to scratch the cable (A).
Screw (B)
Cable (A)
Screws (C)
Connector (A)
Screws (D)
1-6. Removal of Cassette Up Unit
1. Remove the Cassette Cover.
2. Remove the Left Side Panel.
3. Loosen the 4 screws (A) and remove the panel.
Screws (A)
DIS-3