3.6.2 Warming Up The Machine - Optimum Opti drill B 24H Operating Manual
Bench drilling machine upright drilling machine
Hide thumbs
Also See for Opti drill B 24H:
- Operating manual (80 pages) ,
- Operating manual (100 pages) ,
- Operating manual (113 pages)
Table of Contents
Advertisement
Available languages
Available languages
3.6.2 Warming up the machine
ATTENTION!
If the drilling machine and in particular the drilling spindle is immediately operated at
maximum load when it is cold it may result in damages.
If the machine is cold, e.g. directly after having transported the machine, it should be warmed
up at a spindle speed of only 500 1/min for the first 30 minutes.
B24H | B24HV | B28H | B28HV
EN
Version 2.2.6 - 2022-04-07
Translation of the original instructions
105
Advertisement
Table of Contents
