Renesas R8C/Tiny Series Software Manual page 3

Using This Manual
This manual is written for the R8C/Tiny series software. This manual can be used for all
types of microcomputers having the R8C/Tiny series CPU core.
The reader of this manual is expected to have the basic knowledge of electric and logic
circuits and microcomputers.
This manual consists of six chapters. The following lists the chapters and sections to be
referred to when you want to know details on some specific subject.
• To understand the outline of the R8C/Tiny series
and its features ................................................................................... Chapter 1, "Overview"
• To understand the operation of each addressing mode .................. Chapter 2, "Addressing Modes"
• To understand instruction functions
(Syntax, operation, function, selectable src/dest (label), flag changes, description example,
related instructions) .............................................................................. Chapter 3, "Functions"
• To understand instruction code and cycles ......... Chapter 4, "Instruction Code/Number of Cycles"
• To understand instruction interrupt ..................................................... Chapter 5, "Interrupt"
• To understand calculation number of cycles ................. Chapter 6, "Calculation Number of Cycles"
This manual also contains quick references immediately after the Table of Contents. These
quick references will help you quickly find the pages for the functions or instruction code/
number of cycles you want to know.
• To find pages from mnemonic .................................. Quick Reference in Alphabetic Order
• To find pages from function and mnemonic ......................... Quick Reference by Function
• To find pages from mnemonic and addressing ................ Quick Reference by Addressing
A table of Q&A, symbols, a glossary, and an index are appended at the end of this manual.