Putting A Call On Hold; Putting A Call On Private Hold - Snom M58 User Manual

Putting a call on hold

You can put an outside call on hold by pressing Hold or
calls on hold automatically when you answer another call, transfer a call, or create a
conference� Note that you cannot put an intercom call on hold�
To take the call off hold:
1� Press Call List�
2� If you have multiple calls on hold, press
to select the call you want to take off hold�
Press Resume�
3�
If another party puts you on hold, you may see the
message Held by far end� This message depends on
compatibility between phones and PBX types, and may
not always appear� You can press End to end the call�
To make a new call while on hold:
1� When you have a call on hold, use the keypad to enter the number you wish to dial�
Call the number by pressing Dial ,
2�
key)�

Putting a call on private hold

You can put a shared call on "private hold" to prevent any non-system phones (not M55
or M58) from resuming the held call shared across many SIP devices�
To put a shared call on private hold:
Press and hold the Hold soft key�
•
To take the call off private hold:
1� Press Call List�
2� If you have multiple calls on hold, press
take off hold�
Press Resume�
3�
â
Hold
or
or an idle PFK (assigned as a shared line
or
33
� The deskset also puts
Hwang Jin
to select the call you want to
Hwang
Hwang Jin
Hwang Jin
Hwang Jin
Hwang Jin