Table of Contents
Advertisement
Setting
Enable STUN
Server Address
Port
Enable STUN Keep-
Alive
Keep-Alive Interval (sec) Enter the interval (in seconds) for sending UDP keep-alive.
3.2.1.14 Music on Hold Settings
Setting
Enable Local MoH
3.2.1.15 Session Timer
Setting
Enable Session Timer Enter the lower limit of the Real-time Transport Protocol (RTP) port range. RTP
Minimum Value (sec)
Maximum Value (sec)
3.2.1.16 Jitter Buffer
Description
Enables or disables STUN (Simple Traversal of UDP through NATs) for
account 1. The Enable STUN setting allows the HD10X to identify its
publicly addressable information behind a NAT via communicating with a
STUN server.
Enter the STUN server IP address or domain name.
Enter the STUN server port.
Enable or disables UDP keep-alive. Keep-alive packets are used to maintain
connections established through NAT.
Music On Hold
✓ ✓
Enable Local MoH
Description
Enables or disables a hold-reminder tone that the user hears when a far-
end caller puts the call on hold.
Session Timer
Enable Session Timer
Minimum Value (secs)
Maximum Value (secs):
Description
ports specify the minimum and maximum port values that the phone will use
for RTP packets.
Set the session timer minimum value (in seconds) for account 1.
Set the session timer maximum value (in seconds) for account 1.
Jitter Buffer
Fixed
Fixed Delay (ms):
Adaptive
Normal Delay (ms):
Minimum Delay (ms):
Maximum Delay (ms):
SIP Phone Configuration Guide
90
1800
70
3600
80
60
240
- 18 -
Advertisement
Table of Contents
