Webui; Using The Webui - Snom M58 User Manual

WebUI

Using the WebUI

Use an Internet web browser to access the Web User Interface (WebUI) that resides
on your base station� After you log on to the WebUI, you can configure the following
features:
• Base Preferences
• User Preferences
• Base Directory
• Blocked List
• Remote XML directory
• User Password
The WebUI also has a System Status, Cordless Registrations, Cordless status and Base
status page, where you can view network status and registration information about
your desksets�
To access the WebUI:
1� Ensure that your computer is connected to the same network as your base station�
2� Find the IP address of your base station:
When the phone is displaying the idle screen, press the MENU/Confirm key�
a�
b� Press
c� With Status highlighted, press Enter�
With Network highlighted, press Enter�
d�
Select the desired network protocol, IPv4 or IPv6 and then press Enter�
e�
The IPv4 or IPv6 screen appears:
f� On the IPv4 or IPv6 screen, note the IP Address�
3� On your computer, open an Internet web browser� Depending on your web
browser, some of the pages presented here may look different and have different
controls�
4� Type the base station's IP address in the web browser address bar and press
ENTER on your computer keyboard:
A Login window appears�
(Settings), and then press OK�
to select
59