Configuring The Deskset; Setting Call Waiting; Viewing Deskset Status - Snom M58 User Manual

Configuring the Deskset

You can configure the deskset using one of two methods:
The Call Features and User settings menus on the deskset�
1�
2� The WebUI, which you access using your Internet browser�
This section describes settings you can change using your deskset� For information
about settings you can change on the WebUI, see "WebUI" on page 59�
The system administrator can use the Admin settings menu to configure secure
browsing, edit the PIN code, and edit the password�

Setting call waiting

When call-waiting alerts are enabled, an alert will display on-screen whenever you
receive an incoming call during an active call�
To turn call-waiting alerts on or off:
Press the MENU/Confirm key�
1�
2� Press to select
press OK�
3� Press or
OK�
4� Press or
5� Press Set�

Viewing deskset status

In the Status menu, you can view the IP address of your base station, software version
of your deskset, and registration status of your SIP accounts� You may need this
information for troubleshooting purposes�
To view the Status menu:
Press the MENU/Confirm key�
1�
2� Press to select
With Status highlighted, press Enter�
3�
4� Press or
or Product Info, and press Enter�
(Call features), then
to scroll to Call waiting and press
to choose On or Off�
(Settings), then press OK�
to scroll to either Network, Line,
53