Page 1
SNOM300 USER MANUAL Thank you for purchasing Snom300. Make
s ure
a nd
a cknowledge
t hat
y ou
h ave
r ead
t his
m anual
b efore
u sing
S nom300.
...
Maintenance/Cleaning Please use soft dry clothes to clean the device. Don’t use wet clothes. Don’t use volatile chemical like benzene, or thinner since they can damage the device. If you want to use a chemical wipe, please read the cautionary notes before using it. Connection Method: 1.
Page 3
Keypad Familiarization 1. Navigation key – for navigation within the display menu and the phone book. 2. Enter key – to confirm actions, selections and inputs. *Always press the “ENTER Key” after inputting the numbers dialed 3. Cancel Key – to cancel actions or inputs.
Page 4
General Settings 1. Verify device’s IP Address. Press the Navigation key [Down Arrow] à Select [Information IPAdr] and Press enter [Check] button. 2. Snom300 and the PC must be connected to the same network. Launch any web browser such as Internet Explorer. Enter IP Address observing the format below. http: // (IP address) Example: If the IP address is written as 192.168.001.002 , it should be entered as http://192.168.1.2/...
Page 5
3. On the [Setup] options, select [Identity 1]. Display Name and Account: Enter [Unique ID]. Password: Enter [Registered Password] (sent thru mail). * If you changed password, enter your new password. Registrar and Outbound Proxy: Enter [Login Server]. Authentication Username: Enter [Unique ID].
Page 6
4. On the [Setup] options, select [Identity 1], then click [NAT]. Keepalive Interval (seconds): Enter [20] seconds. * Click [Apply] to save changes.
Page 7
5. On the [Setup] options, select [Preferences]. Web Interface Language: Select [English]. Language: Select [English]. Number Display Style: Select [Number]. Tone Scheme: Select [Japan]. * Click [Apply] to save changes...
Page 8
6. On the [Setup] options, select [Advanced] NTP Time Server: Enter [ntp.jst.mfeed.ad.jp]. NTP Refresh Time (sec): Enter [3600] Timezone: Select preferred time zone * Click [Apply] to save changes. ...
Page 9
7. On the [Setup] options, select [Advanced], then click [Audio]. Call Waiting Indication: Select [OFF]. * Click [Apply] to save changes. ...
Page 10
8. On the [Setup] options, select [Advanced], then click [SIP/RIP] Time Support (RFC4028): Select [OFF]. * Click [Apply] to save changes...
Page 11
9. On the [Setup] options, select [Advanced], then click [Update]. Update Policy: Select [Never update, do not load settings]. Subscribe Config: Select [OFF]. PnP Config: Select [ON]. * Click [Apply] to save changes. * Click [Reboot] to reboot the device to apply all changes. ...
Page 12
10. On the [Setup] options, select [Function Keys] Function keys: L1 and L2: Device’s extension channel. Both lines can be used simultaneously Redial: Press to call the previous dialed number Directory: Phonebook Transfer: Transfer button *not supported by our service. Put the other party on hold and press [Transfer], then, dial the destination extension number.
Page 13
* Click [Apply] to save changes. 11. On the [Operation] options, select [Home]. View Call History Verify from Settings Screen Dialed Numbers: List of previously called/dialed numbers. Missed Calls: List of calls that is terminated before being answered by its intended recipient.
Page 14
Press [Navigation Key] à Select [List: Missed]. You can also view other lists such as [Missed], [Received], [Dialed]. To make a call, select a number from the list and press [Enter key]. 12. On the [Operation] options, select [Directory]. Setting Blocked Numbers ...
Page 15
You can also reject calls from anonymous callers. The number must be registered in the device to be set as an anonymous caller. Example: Name: Anonymous Number: Anonymous @XXX.XXX.XXX.XXXX (Server IP address) 13.On the [Setup] options, select [Identity 1], then click [SIP]. Setting prefix (184) *You can make an anonymous call if you put the prefix 184 in Japan.
Page 16
Firmware:
E nter
[ http://provisioning.snom.com/download/fw/snom300-8.4.35-SIP- f.bin] Click [Load] to load the firmware *It takes few minutes to load the firmware. Please do not unplug or disconnect the device during firmware loading. *The Phone is delivered with preinstalled software (firmware), which allows operating your phone flawlessly.
• Currently used version is not updated. • IP address in the web browser and device does not match. IP address: [http://IP address of the device/dummy.htm?settings=save&ip- _frag_enable=on] • Firmware may not be updated. * Configuration of settings depends on the version of the device. Safety Precautions This manual contains precautions to assure user’s safety while using this product.
Page 18
*This device is not waterproof. If in case water entered the device, unplug the device and contact the dealer *Do not place near the kitchen table or humidifier, or near oil and moisture. The device may malfunction, cause electric shock and fire. *Do not place in humid and dusty area.
Troubleshooting Please check the troubleshooting procedure before requesting a repair. If the problem doesn’t get resolved, please contact us. Problem Solution General Failure Plug and Unplug from the power source. (Do this for few times). Wait for at least one minute before plugging the device.
Need help?
Do you have a question about the 300 and is the answer not in the manual?
Questions and answers