Table of Contents
Advertisement
Quick Links
Setting up a Snom DECT Base of the M-SC-Series on a
FritzBox
Introduction
1) Connecting FritzBox to DSL
Connecting FritzBox to DSL via DSL adapter
2) Setting up Internet access
3) Setting up Snom IP-Phone
3.1) Step by step instructions - FritzBox:
3.2 Step by step guide - Snom DECT base:
Pairing handsets
Rename Handset
Create accounts
Assign account to handset
4) Set up Snom DECT handset of the M-SC series directly on the Fritzbox
Telephony Features
Change language
Forward calls:
Attended transfer
Blind transfer
Related articles
You can enlarge all pictures by clicking on them!
Introduction
To anticipate this, a FritzBox can easily act as a
past. Unfortunately, the FritzBox's range of functions is not comparable to that of a professional telephone system (
This article is based on a test on a
1) Connecting FritzBox to DSL
The cables and adapters supplied with the FritzBox differ depending on the product variant.
Therefore, take the cabling according to the scope of delivery of your FritzBox as in one of the two following sections described above.
Connect FritzBox to DSL via DSL cable (TAE/RJ45)
1.
Plug the RJ45 plug of the DSL cable into the "
2.
Plug the TAE plug of the DSL cable into the socket of the TAE socket labeled " " (see Fig. 1).
Fritzbox 7590
Fritzbox 7390
SIP registrar
and thus integrate VoIP telephones in the same way as ISDN or analog telephones, in the
FritzBox 7590
with
Fritz OS version 7.20
DSL/TEL
" socket of the FritzBox.
. It was tested on a Telekom All-IP connection.
F
PBX
).
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Snom M-SC Series
Summary of Contents for Snom M-SC Series
- Page 1 3.2 Step by step guide - Snom DECT base: Pairing handsets Rename Handset Create accounts Assign account to handset 4) Set up Snom DECT handset of the M-SC series directly on the Fritzbox Telephony Features Change language Forward calls: Attended transfer...
-
Page 2: Setting Up Internet Access
Connecting FritzBox to DSL via DSL adapter Plug the long end of the DSL/telephone cable into the " DSL(/TEL) " socket of the FritzBox. Insert the short grey cable end into the grey DSL adapter. Plug the DSL adapter into the socket of the TAE socket labeled " ". Leave the black cable end free (see illustration). - Page 3 ) we will first explain how a VoIP phone (regardless of whether DECT or Deskphone) is created in the FritzBox. In the second section ( ), we will go into how the configuration looks like on the Snom page. 3.1) Step by step instructions - FritzBox: Click on "...
- Page 4 Since the desired telephone (with and without answering machine) is already selected by default, simply click on " Next " on the far right here. Next select the item: " LAN/WAN (IP phone) ". Name the new phone with a unique name. Then click on "...
- Page 5 The user name should have at least 8 characters. AVM changed the password rules. Now it has to be more safe. And it is no longer important how long it is, but i should have a combi nation of lower and upper case letters numbers special characters as usual.
- Page 6 Check in the summary if everything looks correct. Then click on " Next ". To complete the process, a " popup window " will appear asking you to do this with an existing telephone to confirm the legality of the setup process. This prevents external users from misusing your FritzBox for their own purposes. If you don't have another phone just press the FritzBox button on your FritzBox.
-
Page 7: Rename Handset
Enter Snom Webinterface Since automatic provisioning is not supported by the Fritzbox, the Snom DECT base must be set up via your web user interface (WUI). To access the base, enter the IP address of your phone in your Internet browser (e.g. -
Page 8: Create Accounts
Create accounts Unlike the DECT M series devices, the account information of the M-SC series devices is not divided into server and SIP extension. For the M-SC bases , a separate account is created for each phone number. Which handset responds to which number can be read in the next section. Of course the number assignment also depends on the number you have assigned to the account in the Fritzbox. - Page 9 The first handset should now work. Assign account to handset...
- Page 10 " and then to " Account Assignments ". 4) Set up Snom DECT handset of the M-SC series directly on the Fritzbox The configuration of a M15-SC on the FritzBox is also very easy. In our example we assume that you have just unpacked the FritzBox and no DECT device has ever been connected.
- Page 11 Before you do this, please scroll down a bit to the " Security " item and change the value there to " Allow non-encrypted DECT connections ". Now activate the DECT base by checking the box " DECT base station active "...
- Page 12 The Fritzbox will tell you that no DECT handsets are connected and will ask you to add a device. So click on the message and the following window " Register cordless phone (DECT) ". A progress bar appears. As soon as the progress bar is visible, press NEXT on the M15-SC and then the hash key. As far as it is an unregistered handset. You can recognize this by the fact that the display of the M15-SC already shows the following: “Press and hold HANDSET LOCATOR key at base for 4 seconds”...
- Page 13 Followed by a test ringing on the handset. Once you have answered " " to the question, you can enter a name for the handset. The name will not be displayed on the M15-SC , but for internal calls it will be used to show the called party which device is calling. Then you can select the phone number you want to use with the DECT device.
-
Page 14: Telephony Features
In the overview the new DECT handset now appears as follows. For direct configuration of a snom phone on any other router (without SIP registrar feature) on a telecom line they need a different configuration: For a standard All-IP connection of the Telekom it is the following :... -
Page 15: Blind Transfer
Select " A handset party " if you want to transfer the call to another handset registered at the same basestation. Select " A new party " if you want to transfer the call to any other number. With your selection highlighted, press Dialing the third party: If you selected "... - Page 16 Setting up a Snom Phone on 3CX PBX Setting up a Snom C520 WiMi on a FritzBox Setting up a Snom DECT Base of the M-SC-Series on a FritzBox Setting up a Snom DECT Base of the M-Series on a FritzBox...
- Page 17 Setting up a Snom Phone on Pascom PBX Determining the IP address of your DECT M-SC-Series base Entering Web Interface - WUI of your Snom DECT-M-SC Series Base How to configure VPN on a M200SC - M215SC How to factory reset the M200-SC , M215-SC...
Need help?
Do you have a question about the M-SC Series and is the answer not in the manual?
Questions and answers