Table of Contents
Advertisement
C300 User Guide
3. If you are asked for a PIN code, enter 0000.
If NFC pairing does not work, try again or try connecting via Bluetooth pairing.
Switching audio to a mobile phone using NFC
The mobile phone must be paired to the speakerphone.
1. Place the NFC zone of your mobile phone against the NFC zone of the speakerphone (indicated
by
). When NFC is detected, the speakerphone plays a tone. The circle LEDs turn white for one
second.
2. If you are asked for a PIN code, enter 0000.
P
lay audio
When the C300 is paired to a device, it acts as an external speaker and plays audio from the paired
device.
When the C300 is playing audio from a paired Bluetooth device, the audio will be interrupted and
changed to PC audio immediately when you connect the C300 to a Windows PC with the USB cable.
If there is a Bluetooth phone call, the USB audio will be interrupted. The audio source of the C300 will
be changed to the Bluetooth phone call.
R
eceive a call
When your paired mobile phone receives an incoming call, the audio currently playing on the C300 is
interrupted (regardless whether the audio is from PC USB or Bluetooth device). The C300 rings and
the circle LEDs 1–8 flash green.
A
nswer an incoming call
Press
. During the call, some of the circle LEDs turning white indicate the direction from where the
microphones are receiving sound.
C
all waiting
If your paired mobile phone receives an incoming call while a call is in progress, the C300 beeps
twice.
•
Press
to hold the current call and switch to the other call.
•
Press
for at least two seconds to end the current call and switch to the other call.
R
eject an incoming call
Press
for at least two seconds.
14
Using the C300
Advertisement
Table of Contents
