Setting The Language; Setting The Date And Time Format - Snom M58 User Manual

To view the IP address of your base station:
1� On the Status menu, with Network highlighted, press Enter�
2� Press or
3� Press to scroll down to view the IP address�
To view the firmware version of your deskset / base station:
On the Status menu, press
1�
2� Press or
3� Press to scroll down to view the firmware version�
To view the line status of your deskset:
On the Status menu, press
1�
2� Press or
3� Press or

Setting the language

1� Press
-OR-
Press the MENU/Confirm key� Press
Press or
With Language highlighted, press Enter�
2�
3� Press or
Press Set to save, or press Back to cancel�
4�

Setting the date and time format

1� Press
-OR-
Press the MENU/Confirm key� Press
Press or
2� Press or
3� Press or
(MM/DD/YYYY or DD/MM/YYYY)�
4� Press or
(12-hour or 24-hour)�
Press Set to save, or press Back to cancel�
5�
to select IPv4 or IPv6, and press Enter�
to select This device or Base/Cell and press Enter�
to select a line and press Enter�
to scroll through the information about the line�
to scroll to User settings, and press Enter�
to choose the desired language�
to scroll to User settings, and press Enter�
to scroll to Date/time, and press Enter�
to set the Date format
to set the Time format
to scroll to Product Info and press Enter�
or
to scroll to Line and press Enter�
or
to select
to select
54
(Settings), then press OK�
(Settings), then press OK�
US
US
US