Setting The Display Options; Setting Silent Mode - Snom M58 User Manual

Setting the display options

You can configure the display options on the deskset screen – backlight, screensaver,
power save timeout, wallpaper and display theme�
To change the display options:
1� Press
-OR-
Press the MENU/Confirm key� Press
Press or
2� Press or
3� Press or
• Backlight On : press
Mid, or High�
• Backlight Idle : press
Low, Mid, or High�
• Timeout : press
timeout (in seconds)�
• Screensaver : press
• Theme : press
Press Set to save, or press Back to cancel�
4�

Setting Silent Mode

If Silent Mode is enabled:
• The deskset will not play the sounds of the ringer, confirmation tone, notification
tone, key tone, and end of list tone�
• The icon is displayed at the top of the deskset screen�
To set Silent Mode:
1� Press
-OR-
Press the MENU/Confirm key� Press
Press or
2� Press or
3� With Silent Mode highlighted, press Enter�
4� Press or
5� Press Set to save, or press Back to cancel�
to scroll to User settings, and press Enter�
to scroll to Display, and press Enter�
to select a display option:
or
or
or to choose the backlight
or
or to choose a display theme�
Hwang Jin wook | 11.Oct.2022 | R
Hwang Jin wook | 11.Oct.2022 | Revis
to scroll to User settings, and press Enter�
Hwang Jin wook | 11.Oct.2022 | Revis
to scroll to Audio, and press Enter�
Hwang Jin wook | 11.Oct.2022 | Revis
Hwang Jin wook | 11.Oct.2022 | Revi
to choose Disabled or Enabled�
Hwang Jin wook | 11.Oct.2022 | Revis
to select
to choose Low,
to choose Off,
to choose Off, On (1 min), or On (2 min)�
to select
55
(Settings), then press OK�
(Settings), then press OK�
US
US
US
US
US
US