ICP DAS USA DN-8368MB User Manual page 8

CON2
The connectors CON2 are a 5-pin connector for external Power supply (24V input).
Table 1-3 shows its I/O connector signal description.
Pin NO Pin Define
1 FGND
2 EGND
3 EGND
4 E24V
5 E24V
CON3
The connector CON3 is a 3-pin connector for connecting general purpose I/O.
There are one digital input and one digital output signal, when the connectors
connect to the CN1A of main card (the one closer to the PCB board), the input
signal is defined as emergency stop. When the connectors connect to the CN1B of
main card, the input signal is defined as general purpose input signal. Table 1-4
shows its I/O connector signal description:
Pin NO Pin Define
1 N.C
2 EMG/GDI11
3 GDO1/GDO2
http://www.icpdas.com
Table 1-3
Function description
Frame ground of DN-8368MB
Ground of the external power
Ground of the external power
External power supply of +24V DC
External power supply of +24V DC
Table 1-4
Function description
No Connection
Emergency stop signal( or General purpose input signal)
General purpose output signal
DN-8368MB User Manual
V 1.0 8