Table of Contents
Advertisement
JP10
User can choose the analog input source from the connector of CNAIO (from pin5
to pin7) of card (or the MO2 of CN3 of J2s servo-driver via the jumper 10 (JP10).
The detail content is as below:
Fig 1-10 the analog input of card is connected to the connecter of CNAIO (Pin5 ~
Pin7) (default setting)
Fig 1-11 the analog input of card is connected to the MO2 signal of J2S servo-driver
V 1.0 18
http://www.icpdas.com
DN-8368MB User Manual
Advertisement
Table of Contents
