Setting Move Sequences - THORLABS TST101 User Manual

5.6 Setting Move Sequences

The Kinesis software allows move sequences to be programmed, allowing several
positions to be visited without user intervention. For more details and instructions on
setting move sequences, please see the Kinesis Helpfile.
5.7 Changing and Saving Parameter Settings
During operation, certain settings (e.g. max velocity, jog step size etc) can be
changed as required. Other settings (e.g. PID parameter values) cannot be changed
so easily. When the Kinesis Server is run up and the stage/acuator association made,
suitable default settings are loaded and these values have been chosen to provide
safe performance in the majority of applications. However, for applications where
these settings need to be changed, a new set of Device Start Up settings', must be
created which can then be applied and/or uploaded on subsequent start up. See the
Kinesis Helpfile for more details.
T-Cube Stepper Motor Controller
25