THORLABS TST101 User Manual page 12

3.2.3 Removing the Baseplate
The baseplate must be removed before the rubber feet (supplied) can be fitted, or the
unit is connected to the USB controller hub..
Detail A
Baseplate attachment screws
1) Using a hexagon key, remove the bolts securing the unit to the baseplate. Retain
the bolts for future use if the baseplate is refitted.
2) Invert the unit.
3) Remove the backing paper from the rubber feet (supplied) taking care not to touch
the exposed adhesive surface.
4) Position the feet as desired, then press and hold for a few seconds until the
adhesive has bonded.
5) The unit may now be used freestanding, sitting on its rubber feet.
12
Fig. 3.1 Removing The Baseplate
Detail B
Baseplate removed and rubber feet fitted