Installation (All Models) - Culligan ClearLink PRO Installation, Operation, And Service Instructions With Parts Lists

Installation (All Models)

NOTE If using an external flow switch, install the external flow switch before installing the
ClearLink. See
NOTE Refer to the manual provided with your filter/RO for installation instructions specific to that system.
NOTE Some installations may require adapters and fittings not included with the product.
Review the manual and your installation before beginning.
NOTE Consult your local plumbing codes and install accordingly.
12 Culligan ClearLink
®
"External Flow Switch for a Secondary Outlet" on page 16
1. Turn off both hot and cold water
shut-off valve then turn on the
kitchen faucet and allow all
water to drain from line.
2. Disconnect the cold water line from the
cold water shut-off valve.
NOTE If rigid plumbing pipe (metal or plastic)
is used, you may need to shorten the
pipe using a hacksaw or pipe cutter to
accommodate the control box.
for instructions.
12 Cat. No. 01033136