Culligan ClearLink PRO Installation, Operation, And Service Instructions With Parts Lists page 23

Control Box Operation
ClearLink™
ClearLink™ Connect and Drinking Water Connect
Reset Button
for filter capacity.
Aquasential ClearLink™ PRO
Cat. No. 01033136
Power: Flashes green at power up, filter capacity reset, and
while dispensing filtered water. Continues to flash for 1 minute
after the flow of filtered water has stopped.
Replace Batteries: Flashes red when the batteries for the
control box need to be replaced. This indicator automatically
clears when new batteries are detected.
Replace Filters: Flashes red when the filters have less than
10% of their life remaining due to flow or time. This indicator is
reset by pressing the reset button for three seconds.
Replace RO Membrane: Flashes red when the treated water
has a TDS level greater than 25% of the untreated water. This
indicator will automatically reset when low TDS water is detected.
Power: Flashes green at power up, filter capacity reset, and while
dispensing filtered water. Continues to flash for 1 minute after the
flow of filtered water has stopped.
Replace Batteries: Flashes red when the batteries for the
control box need to be replaced. This indicator automatically
clears when new batteries are detected.
Replace Filters: Flashes yellow when the filters have less
than 10% of their life remaining due to flow or time. This
indicator is reset by pressing the reset button for two seconds.
Replace RO Membrane: Flashes red when the treated water
has a TDS level greater than 25% of the untreated water. This
indicator will automatically reset when low TDS water is detected.
Leak Detected: Flashes red when the leak sensor has
detected water.
Wi-Fi Enabled: Flashes blue when the Wi-Fi is connected to
the control box.
Power: Flashes green at power up, filter capacity reset, and
while dispensing filtered water. Continues to flash for 1 minute
after the flow of filtered water has stopped.
Installation 23