Num. of Char. Read: Enter a value (a multiple of 4) based on the number of data to be
read.
Read Data: The data box will display the corresponding read RFID data
Return Result: The return result of a successful or failed operation.
return error codes, please check Appendix A
3. Access Password Setup
This part can carry out relevant operation on RFID Access password. Please refer to
following figure 5.21:
Unlock: To unlock or permanently unlock the Access password, enter the Access
password on the right side to unlock the password.
Access Pwd: HEX format data entry box in which the user enters the Access password to
be written.
Lock: To lock or permanently lock the Access password, enter the Access password to be
set on the right side.
Write: After setting, click "Write" to write the data (the check box on the left will be
checked and the check box step will not be operated if it is not checked).
Return result: The return result of a successful or failed operation.
return error codes, please check Appendix A
5.21
55
For details about
For details about