Memory Bank: Select data write area. (EPC, UESR, TID, some labels do not support UESR
and TID area)
Unlock: To unlock or permanently unlock a label, enter the Access Password on the right
side.
Write Data: HEX format data entry box in which the user enters the data to be written.
Lock: To lock or permanently lock labels, enter the Access Password to be set on the
right.
Write Button: After setting, click "Write" to write the data (The operation is performed
only when the check box on the left is selected. If the check box is not
selected, the operation will not be performed).
Return Result: The return result of a successful or failed operation.
return error codes, please check Appendix A
2. Read Data
This part can read the data stored in the RFID tag, and the operation should ensure that
the RFID tag is on the RFID module. Please refer to following figure 5.20:
Memory Bank: Select data read area (EPC, UESR, TID)
5.19
5.20
54
For details about