Add Rfid Tags In Bartender - Gainscha GA-2408T Series User Manual

3.Click the top "Transform", then go
to the bottom serialization, and click
the "Options" button on the right
4.Select increment or decrement to
start serialization.
Methods: The ability to serialize the
way to choose, such as increasing or
decreasing 0-9, A to Z, increasing or
decreasing the hex increasing or
decreasing.
Incremental value: The ability to set
increment values.
Click "OK" in the lower right corner to
complete the serialization setup.
5.After clicking "Print", relevant
settings before printing will pop up:
Serial number: the number of prints
to be serialized
Copies per serial number: The
number of sheets to be printed per
serial number
5.

Add RFID Tags in BarTender

If you want to use RFID printing, you first need to add RFID tags. How to add RFID tags
in BarTender refer to following Excel table.
64