Rfid-Read Access Password; Rfid-Kill Password Setup - Gainscha GA-2408T Series User Manual

4. RFID-Read Access Password

This part can read the Access password. Please refer to following figure 5.22:
Access Pwd.: Data Access Password is required to read Access Password.

5. RFID-Kill Password Setup

This part can carry out relevant operation about Kill password. Please refer to
following figure 5.23:
Access password on the right side to unlock the password.
Access Pwd: HEX format data entry box in which the user enters the Kill password to be
written.
Lock: To lock or permanently lock the Kill password, enter the Access password to be set
on the right side.
Write: After setting, click "Write" to write the data (the check box on the left will be
checked and the check box step will not be operated if it is not checked).
Return result: The return result of a successful or failed operation.
return error codes, please check Appendix A
5.22
5.23
Unlock: To unlock or permanently
unlock the Kill password, enter the
56
For details about