Rs232 Setup; Ethernet Setup - Gainscha GA-2408T Series User Manual

5.10 RS232 Setup

This function can set the Serial port (RS232) in the printer. Please refer to
following figure 5.11:
5.11
Baud Rate: Set the baud rate of the serial port. The device that communicates
with the printer must be the same as that set for the printer.
Parity Check: Set the parity check.
Flow Control: Control and set the flow of serial port transmission.
Data Bits: Can be set for communication.
Stop Bits: Can be set for communication.

5.11 Ethernet Setup

This function can set the Ethernet port in the printer. Please refer to following
figure 5.12:
5.12
IP Mode: dynamic and Static IP setting
47