Rules For Writing Data In Lock State; Epc Area Writes Locking Data; Data Read Rule In Lock State - Gainscha GA-2408T Series User Manual

written in the Write Access Pwd. input box, click the "Write" button on the lower right
corner to write. Return error code details can be referred to Appendix A.

8.2 Rules for writing data in LOCK state

Area
Access Password
Kill Password
EPC Data Area
TID Storage Area
User Storage Area

8.3 EPC Area Writes Locking Data

with a 4-byte HEX code. Click "OK" or "Apply" button, then print the required content
on the label design page to print.

8.4 Data read rule in LOCK state

Using the LOCK command, you can LOCK the saved data area. After the LOCK, data
cannot be modified without the access password.
Area
Access Password
Kill Password
EPC Data Area
TID Storage Area
User Storage Area
Access Password
Check whether the Access Password is required
to write data in LOCK state
Method one: Write Lock Data in BarTender
Lock Data writing needs to set access password. This case will lock
write RFID tag EPC area:
Open BarTender and add the RFID tag (Detailed in Chapter 6,
Section 5). After adding the RFID tag, open the RFID options
(Detailed in Chapter 6, Section 6) in the EPC Gen 2 section, set the
EPC area to lock and enter the password in the Access Pwd. box
Check whether Access Password is required to
Need
Need
Need
Need
Need
Access Password
read data in LOCK state
Need
Need
No
NO
NO
73