Printer Utility - Printer Function - Gainscha GA-2408T Series User Manual

5.14 Printer Utility – Printer Function
This function can set the functions of the printer. Please refer to following figure
5.16:
5.16
Factory Default: Click the button to restore the printer to factory Settings.
Print Test Page: Click the button to print test page for printer.
RTC Setup: Click this button to calibrate the time in the printer.
Cutter Forward Test: After clicking this button, the printer cutter can be tangent
(full cut) test.
Cutter Backward Test: After clicking this button, the printer cutter can be back
cutting (half cutting) test.
AUTO.BAS Exist Check: The AUTO.BAS file in the printer memory can be queried.
Enable Mass Storage: Enables the printer memory. After this function is enabled,
the printer cannot print. To print, restart the printer.
Format Disk: Formats the selected printer memory.
Get Info.: Get information about the printer.
Enable Buzzer: Enable the built-in buzzer of the printer
Disable Buzzer: Turn off the built-in buzzer of the printer
50