Advertisement
Short press: select next option/set parameter (increments).
Long press: continuously select the next option/continuously set parameters (incrementing).
c.
Middle button
Press: confirm selection.
Long press: return to standby mode.
4. Screen saver:
a.
the left button
Press: return to standby mode.
Long press: display printer information.
b.
the right buttons
Press: return to standby mode.
Long press: enter the option state.
c.
Middle button
Short press: return to standby state, at this time: when the current printer has no printing task,
paper out about 5 mm; Pause/continue printing while the printer is printing.
Long press: return to standby state, at this time: when the current printer has no printing task,
continue to print paper; Cancel printing when printing is in the printer's pause state.
7. Driver Setup
1）Insert the driver CD disk, click Next.
8
Advertisement
