5.2 Printer Utility(
Ensure that the power supply of the printer is connected and the printer is in the
state of starting up, and the printer and the computer are normally connected through
the USB cable. Click the
printer Settings, as shown in Figure 5.2:
Printer setting can modify the basic settings of the printer. After modification, click
the
"Set"
in the lower right corner to complete the setting.
5.3 Printer Setup
1. Click the Printer Configuration and Printer Setup Can open and close the printer general
settings screen.
2. Click the Load Button to bring out all printer general setting information through the selected
obtain printer status & information
"Load"
button in the Printer Setup section to obtain the current
38
)
5.2