Loading The Media; Loading The Roll Labels; Ribbon And Print Media Loading Diagram - Gainscha GA-2408T Series User Manual

3.4 Loading the Media

3.4.1 Loading the Roll Labels

1.
Press two buttons on printer two sides
to lift and open the cover.
3.
Pull out the print media till it pass gap sensor and cutter (cutter is optional),
complete media loading.

3.4.2 Ribbon and print media loading diagram

Print head
Paper guide
2.
Load print media into the printer;
adjust the paper guide to be same
width of print media.
Empty ribbon roll
Ribbon
Print media
Gap & black mark sensor
28
Font cover