9.
Other RFID Function Setting
Other RFID function Settings can assist the printer to better complete RFID operations.
There are two modes of operation. While the PrinterUtility Settings
in Chapter 5, Section 3)
options is available in Chapter 6, Section
of the RFID options. Please refer to following figure 7.7.1 and 7.7.2:
Tag type: Sets the type of tag (for example, Class 1 Gen 2).
Transceiver position: Sets the write position of the RFID tag (starting from the front
Retries per label: Sets the number of times a label is rewritten if a write error occurs.
Maximum number of invalid labels: Sets the maximum number of invalid labels that
Invalid print length: Sets the length to print VOID on the label in case of write errors.
Invalid print speed: Sets the speed at which VOID is printed on labels in case of
Action taken when invalid: Sets what happens next to the printer when a write error
and the RFID options in BarTender
6). This section introduce the Function Settings
7.7.1
edge of the tag).
can be repeatedly written to if a write error occurs.
write errors.
occurs (Continue, Stop or Do no operation)
(how to open the RFID
7.1.2
74
(details are available