Loading The Media - Gainscha Intelligent Series User Manual

7. Close the print head mechanism by
pushing down the both sides of the print
head release lever.

3.4 Loading the Media

3.4.1 Loading the Media
1. Move the label roll guard horizontally to the
end of label spindle, then flip down the label roll
guard.
3. Pull the Print head release lever to open
print head mechanism.
2. Place the media roll on the label supply
spindle and use label roll guard to fix it.
4. Install the label through the media guide bar,
damper, media sensor, and label guide to install
the media. (See the "Media Loading Path"
illustration below).
21