Triumph Daytona 675 2014 Owner's Handbook Manual page 96

Maintenance and Adjustment
Undo and remove the screws securing
the frame protector (if equipped).
2
1
1. Screw
2. Frame protector
Remove the frame protector.
Remove the two screws securing the
fairing to the frame.
1
1
chub 2
1. Screw
2. Fairing stud/grommet location
Note:
• The upper and lower fairings are
removed as a single unit.
Detach the lower fairing stud from the
frame grommet.
96
The upper edge of the fairing is located
into the cockpit with two hooks. The
panel must be moved rearwards until
the two hooks are clear of the slots.
Remove the fairing.
Disconnect the turn signal electrical
connectors.
If the coolant level is found to be low,
or if coolant has to be added regularly,
inspect the cooling system for coolant
leaks. If necessary, pressure test the
system to locate the source of the
leak and rectify as necessary. Loss of
coolant may cause the engine to
overheat and suffer severe damage.
Remove the cap from the expansion
tank and add coolant mixture as
necessary to bring the level up to the
2
MAX mark. Reinstall the cap.
chuk
1. Coolant expansion tank
2. Coolant expansion cap
3. Upper fluid level
4. Lower fluid level
Caution
2
1
3
4