Chain And Sprocket Wear Inspection - Triumph Daytona 675 2014 Owner's Handbook Manual

Maintenance and Adjustment
Repeat the chain adjustment check.
Re-adjust if necessary.
Warning
Operation of the motorcycle with
insecure adjuster lock nuts or a loose
wheel spindle may result in impaired
stability and handling
motorcycle. This impaired stability and
handling may lead to loss of control or
an accident.
Check the rear brake effectiveness.
Rectify if necessary.
Warning
It is dangerous to
motorcycle with defective brakes and
you must have your
Triumph dealer take remedial action
before you attempt to ride the
motorcycle again. Failure to take
remedial action may reduce braking
efficiency leading to loss of control or
an accident.
104

Chain and Sprocket Wear Inspection

of the
2
1. Measure across 20 links
2. Weight
Remove the chain guard.
operate the
Stretch the chain taut by hanging a
20 - 40 lb (10 - 20 kg) weight on the
authorized
chain.
Measure the length of 20 links on the
straight part of the chain from pin
center of the 1
st
the 21
unevenly, take measurements in several
places.
If the length exceeds the maximum
service limit of 12.6 in (319 mm), the chain
must be replaced.
Rotate the rear wheel and inspect the
drive chain for damaged rollers, and
loose pins and links.
1
st
pin to the pin center of
pin. Since the chain may wear