Engine Management System Malfunction Indicator Light; Alarm/Immobilizer Indicator Light - Triumph Daytona 675 2014 Owner's Handbook Manual

Table of Contents

Advertisement

Engine Management System
Malfunction Indicator Light
The malfunction indicator light
for the engine management
system illuminates when the
ignition is switched on (to indicate that it
is working), but should not become
illuminated when the engine is running.
If
the
malfunction
indicator
becomes illuminated when the engine is
running, this indicates that a fault has
occurred in one or more of the systems
controlled by the engine management
system. In such circumstances, the
engine management system will switch
to limp-home mode so that the journey
may be completed, if the fault is not so
severe that the engine will not run.
Warning
Reduce speed and do not continue to
ride for longer than is necessary with
the
malfunction
indicator
illuminated. The fault may adversely
affect engine performance, exhaust
emissions
and
fuel
Reduced engine performance could
cause a dangerous riding condition,
leading to loss of control and an
accident.
Contact
an
Triumph dealer as soon as possible to
have the fault checked and rectified.
Note:
If the malfunction indicator light
flashes when the ignition is switched
on, contact an authorized Triumph
dealer as soon as possible to have
the situation rectified. In these
circumstances the engine will not
start.

Alarm/Immobilizer Indicator Light

turned to the OFF position. If the
motorcycle is equipped with a genuine
Triumph
immobilizer will operate as normal but
light
the alarm/immobilizer light will operate
as described below.
With Alarm Installed
The alarm/immobilizer light will only
illuminate when the conditions described
in the genuine Triumph accessory alarm
instructions are met.
Without Alarm Installed
When the ignition switch is turned to
the OFF position, the alarm/immobilizer
light will flash on and off for 24 hours to
show that the engine immobilizer is on.
When the ignition switch is turned to
light
the ON position the immobilizer and the
indicator light will be off.
If the indicator light remains on it
consumption.
indicates that the immobilizer has a
malfunction that requires investigation.
Contact an authorized Triumph dealer as
soon as possible to have the fault
authorized
checked and rectified.
General Information
This
Triumph
model
equipped
with
an
engine
immobilizer which is activated
when the ignition switch is
accessory
alarm,
is
the
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents